Popular Hot Rodding Magazine Homepage

Cadillac Engines

With 8 generations of the V8 engine since 1914, Cadillac has more experience making the V8 than any other automotive manufacturer. When Cadillac unveiled its 500 cubic inch engine in 1970 it was the largest V8 ever produced but market shifts throughout the ‘70s forced the company to downsize their cars and engines. Cadillac carried on their tradition of automotive excellence with the emergence of the Premium V engine family including the illustrious Northstar V8, a die-cast all-aluminum DOHC 32-valve engine complete with cast-iron cylinder liners and a fail-safe cooling mode that allowed the engine to be air-cooled and run for 100 miles with no coolant and no damage. Take a look at our Cadillac engines below to get a first-hand look into the brilliance of the Cadillac engine.

Engine Masters Articles

 
Coming Home To GM - Project X - PHR Project Car
After 50 Years Of Service, GM Rebuilds Project X, The Greatest Hot Rod Of All Time, The 1957 Chevy... more
 
1968 Chevrolet Camaro - Hooking Harder
We Put Global West's First-Gen Camaro Suspension To The Test And Got A Measurable Improvement That... more
 
Small Block Chevy Motor - Educated Chevy
The Engine Masters Challenge is a competition that for the last five years has brought builders... more
 
409ci Pontiac Engine - Veteran Warrior
The Engine Masters Challenge was designed to bring the best efforts of veteran engine builders to... more

Hot Rodding Blog

 
1975 Laguna
Here’s a sneak peak of the rear bumper on Project Talladega—our ’75 Chevy Laguna stock car... more
 
Trunk Pins
You’ve heard of hoodpins—but this takes it to a whole nuther Level.... more
 
Marquez Design's 67-68 Billet Tail Lights
When you spend all this time and money restoring and restyling your Camaro, why put OEM tail... more
 
Waterjet Fabrication
Our favorite job shop, Advanced Waterjet, comes through for us big time on Project Talladega.... more
 
Free Take-Off Wheels
We put new wheels and tires on the '75 Laguna--and the old ones are up for grabs. ... more

Hot Rodding Forum

 
PHR article - Winfield's 1940 Ford
Does anyone remember the PHR issue and date featuring Ed Winfield's old 1940 Ford Coupe? Was done... more
 
E6 heads on 351w????
I am in the process of putting a new top end on a 351w in my F-150. I have a set of E6 heads off... more
 
Compression height and rod ratio issue
[italic][bold]What would be the bare minimum compression height possible with todays modern piston... more
 
150 HP for 305 Chevy Engine
In the above article (see subject), found in Engine Masters Magazine, I would like to know the... more
 
1972 Pantera
:cool: 1972 pantera - ground up restoration, fully customized california style, boyd coddington hot... more