Popular Hot Rodding Magazine Homepage Popular Hot Rodding

0506em Hemi 05 Z

Prev Next
Pushrod clearance must be ground into the wedge's lifter valley because of the Hemi conversion's different push rod angles. The clearance reliefs are 1/8-inch deep and can be done by hand with a die grinder.
Hemify Your Wedge

 Pushrod clearance must be ground into the wedge's lifter valley because of the Hemi conversion's different push rod angles. The clearance reliefs are 1/8-inch deep and can be done by hand with a die grinder.  View Related Article

 

Get Adobe Flash player