Popular Hot Rodding Magazine Homepage Popular Hot Rodding

1957 Chevy C6 Corvette Front Suspension

Prev Next
The Corvette framerail was then connected to the modified '57 frame. In all, they cut about 2 1/2 feet out of the original Project X. In the front, you can see the 1/8-inch steel plate (4 inches wide) allowing for a 2-inch overlap on the '57 and the Corvette.
1957 Chevy - C6 Corvette Front Suspension - Up Front - PHR Project Car

 The Corvette framerail was then connected to the modified '57 frame. In all, they cut about 2 1/2 feet out of the original Project X. In the front, you can see the 1/8-inch steel plate (4 inches wide) allowing for a 2-inch overlap on the '57 and the Corvette.  View Related Article

 

Get Adobe Flash player

Car Research Guide